FG Series fluid bed dryer
Main Application
GFG stock stainless steel aeromatic cacao shrimp sugar granule fluid bed drying equipment dryer granulator is the granule high-efficient drying equipment which is matched with YK Type Swing Granulator or GHL Type High-speed Mixing Granulator. It has more fluidized range than traditional horizontal XF fluidized drier and can be easily cleaned. When fluidized, the material is stirred slowly avoiding the block. So it has special advantages for the high wet and sticky material. It's widely used in: a. the granule for troche, capsule and instant medicine; b. big granule and micro-powder in foodstuff, chemical industry, etc; c. wet and sticky granule or powder with different sizes.
Features
1,The structure of fluidization bed is round so as to avoid the dead angle
2,Inside the hopper there is a stirrer in order to avoid agglomeration of raw material and forming canal of flow
3,The granule is discharged through the method of turning over. In this way it is very convenient. The discharging system can be designed as required too
4,It is operated at the condition of negative pressure and seal. The air is filtered. Therefore it is simple in operation and convenient in clean. It is an ideal equipment that is in conformity with the requirements of GMP.
5,The drying speed is fast and the temperature is uniform. In general, the drying time is 15-45 minutes each batch.
Scope of application
1,Use screw to extrude and vibrate granule and granulate the granule with the method of humidity, high speed and mixing
2,Suitable for drying humidity block or powder raw material in the fields such as pharmaceutical, foodstuff, feed stuff, chemical industries and so on
3,The raw material that large in granule and small in block and having adhesive property
4,Suitable for raw materials, its volume will be changed when dry, such as giantarum, polyacrylamide, etc.
| Model | GFG-60 | GFG-100 | GFG-120 | GFG-150 | GFG-200 | GFG-300 | GFG-500 |
| Batch charging(kg) | 60 | 100 | 120 | 150 | 200 | 300 | 500 |
| Blower | Air flow(m3/h) | 2361 | 3488 | 3488 | 4901 | 6032 | 7800 | 10800 |
| Air pressure(mm)(H2O) | 494 | 533 | 533 | 679 | 787 | 950 | 950 |
| Power(kw) | 7.5 | 11 | 11 | 15 | 22 | 30 | 45 |
| Agitating power(kw) | 0.4 | 0.55 | 0.55 | 1.1 | 1.1 | 1.1 | 1.5 |
| Agitating speed(rpm) | 11 |
| Steam consumption(kg/h) | 141 | 170 | 170 | 240 | 282 | 366 | 451 |
| Operating time(min) | ~15-30 (According to the material) |
| Height(mm) | Square | 2750 | 2850 | 2850 | 2900 | 3100 | 3300 | 3650 |
| Round | 2700 | 2900 | 2900 | 2900 | 3100 | 3600 | 3850 |
Thechnical parameters
